Controlling the Safety Lights remotely (via a Web Page)

If you have Safety Lights (e.g. Pixelcom 4Flags) these can be controlled remotely by another PC or Mobile device (i.e. tablet) connected to the same Network as the Timing PC. To set this up, please see this article on how to configure the ability to Control Pixelcom Lights from the Timing App. 

Controlling Safety Lights

The remote control page for the safety lights will list the lights in the order configured in the timing. The number of each light post is shown in the grey left most column. Then from left to right you have:

• Single Yellow
• Double Yellow
• Green
• Blue
• Red
• the Cancel button (X). This will turn off any coloured light for that post. 

At the bottom of the list of light posts is the ALL row. Clicking the corresponding flag light option in this row will set all light posts to that option.