Using an Alpha eFlag

You can control and Alpha compatible eFlag directly from the timing app or a remote device connected to the timing network. 

Controlling the Flag in the Timing app You can control the eFlag directly in the Timing App from the panel on the bottom right hand side of the Timing module.  Which flags are available is configure in the Timing Apps display settings. Some flags can be set to be automatically shown. Click on the image of a Flag to show it on the display.  Click CLEAR to remove any flags and to write a custom message click TEXT.  When issue warnings to a specific driver, type their number into the No. box and select the warning from the dropdown. If there are two competitors with the same number you will be promoted to choose which competitor.

If you cannot connect to the eFlag or the flags are not displaying correctly or at all, please see this troubleshooting guide.

You can also control the eFlag from another device connected to the same network as the Timing PC. To set this up, please see this article on connecting remote devices and this article explains how to Controlling the eFlag remotely (via a Web Page).